RPM Precision 30mm Scope Rings Low .885" FDE

Low rings for a 30mm tube at .885" of height, in FDE. Going low pulls the scope down toward the bore and usually gives the most natural cheek weld on a stock with a fixed comb, as long as the objective bell still clears the barrel and the rail.

Ring height is the first decision when mounting a scope and the easiest one to get wrong. Too low and the front bell drags on the barrel; too high and your face floats off the comb while you hunt for the sight picture. Measure the outside diameter of your objective housing, allow a little clearance, then pick the height. These come from RPM's Precision line and are sized for 30mm tubes only.