RPM Precision 35mm Scope Rings 1.25" High with Bubble Level

Big glass needs room underneath it. These RPM rings hold a 35mm tube at 1.25 inches of ring height, which is what a large objective bell or a fat turret housing usually calls for. Get the height wrong and the scope either contacts the barrel or sits so high the rifle no longer fits your face.

The rings carry a co-linear bubble level in the ring body. From behind the rifle the level is visible with the non dominant eye, so a cant check happens as part of the shot process rather than as a separate step, and the same level gives the reference used to square the scope during installation. Ring body and cap are machined aluminum, the cross bolt and nut are stainless steel, and an alignment lug indexes the cap to the ring body so assembly repeats.