GG&G M1A SOCOM II Accucam QD Scope Mount 30mm Rings

The GG&G SOCOM II Accucam scope mount puts a 30mm scope on a Springfield Armory M1A SOCOM II without stacking a separate base and tall rings. It interfaces with the factory SOCOM II dovetail on top of the Cluster Rail and has 30mm integral rings with four cap screws per ring. It will not fit the SOCOM 16 or Scout factory mount.

The Accucam lever takes the scope off and puts it back with 1/2 MOA repeatability, and dual recoil lugs lock into the rail slots. Ring centers sit 1.260 inches above the rail, clearing objectives up to about 50mm on most scopes. A 3 inch cantilever and 2.5 inches between rings allow eye relief adjustment. Weight is 7.7 oz.