PX4 LTT Compact Carry w/ RDO Slide

In collaboration with Ernest Langdon, The Beretta PX4 Compact Carry was developed with custom features to offer a lightweight hammer fired concealed carry gun. Ernest has been a long proponent of Beretta DA/SA pistols for their accuracy, reliability, and safety. The PX4 Compact was a natural choice as the base of this project because of its rotary barrel design, ammo capacity and smooth trigger pull. Incorporating the stealth levers, talon grips, night sights, and a lightened trigger pull makes this flat shooting pistol an ideal concealed carry gun. The Compact houses the rotating barrel system (barrel length is 3.2''), full 16 round capacity (15+1 in 9mm), an accessory rail, low-profile slide stop, new integral and retractable lanyard loop, and a cold hammer forged barrel for ultimate precision. The PX4 Compact Carry with Trigger Job includes the Optimized Performance Trigger Bar with reduces the reset in single action to 1/10 of an inch. Includes three 15rd magazines. The PX4 Compact Carry with Trigger Job and NP3, Cut and Crowned Barrel and Spurless Hammer includes the LTT Trigger Job, Optimized Performance Trigger Bar and NP3 on the internals of the competition trigger group, magazines, hammer and barrel. The RDO option: your PX4 CC will come ready to receive an optic using an adapter plate which fits the Trijicon RMR footprint. This RDO Solution uses a very similar proprietary adaptor plate as the LTT 92 RDO system with an integrated back-up rear sight that is matched to the height of the integrated rear sight for proper point of impact. The adaptor is held in place with three screws and includes the front dovetail cut. The screws included in the package are (2) Holosun to plate 4 x 40 5/16 and (2) RMR to plate 4 x 40 3/8. TORC Spec: 10 inch pounds. Please Note: RDO Slides are re-cerakoted, and this process will cover the ''red dot'' on the decock lever area.