Area 419 ZERO M-Series 338 Lapua Mag Sizing Die w/ Shellholder

The ZERO M-Series sizing die from Area 419 sizes 338 Lapua Magnum cases full length, from the neck down to the extractor groove, and sets headspace with a micrometer adjustment. That lets you move shoulder bump in measured steps instead of guessing with a lock ring. Neck tension comes from a ground expander mandrel. A .002 mandrel is included, and other sizes come in Area 419's mandrel kits.

This package includes the M-Series shellholder, which the die needs: it will not work with a standard shellholder. It is a 1-1/4" die, so it needs a Hybrid or 1-1/4" turret on a ZERO press, or another press that takes 1-1/4" dies, and it will not fit a 7/8" press. Spent primers are pushed out by a spring, the decap pins are replaceable steel, and a ZERO die ring, a spare decap pin and install tools come with it.